Everyone knows that wireless connection is more handy and simpler to set up compared to the wired connections. But some people prefer to use the wired connection due to its stability and reliability in the connection. However, no rose without thorn, sometimes a problem occurs on the wired connections even though everything looks fine. If this Ethernet not working issue happens to you, you’d better to follow the tutorials of 7 Ways to Fix Ethernet not Working in Windows 10 that we are going to discuss in this article.
Ethernet not working issue in Windows 10
This issue on Ethernet could be a big problem for those who are using this connection for their main internet connection. In fact, the Ethernet not working issue in Windows still happens after they have applied the latest updates, Windows 10 Fall Creators update.
Not only Ethernet nor working problem, but other problems, such as no internet, secured or no WiFi available, also occurs.
So, what cause this Ethernet nor working issue in Windows 10? We believe this issue doesn’t come from the network, but it comes from the hardware or software. You can follow the methods to solve Ethernet not Working in Windows 10 that we are going to show you in this article.
7 Ways to Fix Ethernet not Working in Windows 10
There are some methods that you can try to fix Ethernet not Working problem on your computer. Try to follow each method to find which method is working for your case as each computer has different cause. If one of the methods is working, you can sit back, close this page and enjoy the connection. So, let’s jump to the solutions.
Method 1 – Enable Ethernet Connection
Go to the the Network and Internet Settings section and make sure if Ethernet is enabled. Choose the correct network to connect. It usually says Local Area Connection. If you find that the Ethernet is not connected to the connection, do right click and choose Enable. Just wait for a few seconds for Ethernet to connect. After that you can enjoy the internet connection.
Method 2 – Enable Ethernet Device
If you have tried to enabled the Ethernet connection, but no changes happen, then you should check the Ethernet device. Follow the steps below to enable the Ethernet device.
1. Press Windows + R key simultaneously to show the Run dialog box.
2. Type “devmgmt.msc” and press Enter key.
3. In the Device Manager window, expand the Network adapters category.
4. If you see a computer icon with a downward facing arrow next to your Ethernet card device name, it means the Ethernet is disabled.
5. Right click the device name and choose Enable.
Now you are good to go. Ethernet should have worked well now.
Method 3 – Use different Ethernet Port
The culprit of this issue can be the Ethernet port. It is possible that your Ethernet port is not working properly. You can check this by plugging the cable in a different port of the router. Then, you can check for the internet connection. If the Ethernet port is working well, but you still have the Ethernet nor working issue, you can go to the next method.
Method 4 – Check the cable
If your Ethernet ports are fine, but the Ethernet issue still occurs, there is probably something happens with the cable. Get a new Ethernet cable, you can borrow or buy, and plug it in the router. Now, check the connection. If the Ethernet is still not working, you can try another method.
Method 5 – Update Drivers
The next method to fix Ethernet not working issue on Windows 10 is update drivers. Outdated Ethernet drivers might be the reason why it stops working. Therefore, follow the steps below to update your Ethernet drivers.
1. Press Windows + R key simultaneously to call Run dialog box.
2. Type “devmgmt.msc” and press Enter key.
3. Expand the Network adapters category in the Device Manager window.
4. Right click the Ethernet adapter name on your computer and choose Uninstall.
5. Restart you PC and re-install the Ethernet drivers.
Your drivers should have updated by now.
Method 6 – Turn off Wifi
When you have two internet access, Ethernet and wifi, on your PC or laptop, it will choose the Ethernet as the main connection priority. We suggest you to turn off the wifi connection before you solve the Ethernet not working problem on Windows 10. To turn the wifi off, right click the wifi icon in the notification area > Open Network and Internet Settings > Wifi tab and toggle off.
Method 7 – Turn Off Firewall or Antivirus
There are possibilities that your Firewall or Antivirus block the internet connection. Try to turning off the firewall and antivirus temporarily to check if the internet connection is working well. If it works, you can then turn on the firewall or antivirus again and see if the connection is still fine.
It’s common to have Ethernet not working issue in Windows 10. It happens randomly without notification beforehand. When this problem happens to you, you can read the seven methods above to find out what cause the problem to happen and how to fix it. We hope it helps you. Thank you for reading win10repair.