Blue Screen of Death on Windows is one of the errors that many Windows users are trying to avoid. There are many types of BSOD. One of them is BAD POOL HEADER. This error can happen to Windows 10/8. When this problem occurs, your computer screen will turn blue like the image below.
While in Windows 7, you will see different message with 0x00000019 error code.
Reasons for Bad Pool Header/Error 0x00000019
Usually, the bad pool header error occurs due to the Windows memory allocation problems. Simply put, this issue often happens after installing new hardware or software – often the antivirus software – which doesn’t work with the computer. Besides, faulty drivers & routers or other disk write issues can also lead to Windows bad_pool_header issue.
How to Fix Bad Pool Header/Stop 0x00000019
Solution 1: Uninstall Recently Installed Software
- Right-click on the Start button and then go to Control Panel > Programs and Features.
- Then, you will enter the following interface.
- Next, right-click on the target software and choose Uninstall from the popup list to uninstall the software.
Solution 2: Uninstall Recently Installed Hardware
If you have installed any hardware recently, uninstall it now.
- Right-click on the Start button and choose Device Manager from the list.
- Then, right-click on the hardware driver and select Uninstall.
Solution 3: Disable Fast Startup Feature
- Go to Control Panel > Power Options > Choose what the power buttons do.
- Then, under Shutdown settings option, you need to uncheck Turn on fast startup (recommended).
- At last, click on the Save changes button and restart the computer.
Solution 4: Update Device Drivers
- Open the Device Manager, right-click on the individual driver and select Update Driver Software option.
- Then, just repeat these steps to update all the drivers one by one.
- Restart PC to take effect.
Solution 5: Perform a Clean Boot
If the above solution doesn’t work for you, please then perform a Clean Boot to see whether it can fix the bad pool header error.
- Right-click on the Start button and choose Run from the popup list.
- Then, type msconfig into the run box and press Enter to enter the System Configuration interface as follows.
- Stay at the General interface and check Selective startup under Startup selection.
- Next, uncheck Load startup items, and make sure that both Load system services & Use original boot configuration are selected.
- Next, switch to the Services tab, check Hide all Microsoft services and then click on the Disable all button.
- Press OK and Apply buttons. Restart your PC.
That’s all! Now, try to restart your computer and see if you have fixed bad pool header error on Windows. If the error persists, you might start to think to reinstall the Windows OS. It’s surely will solve the problem. But, before conducting it, you need to backup your data.
For queries and suggestions, don’t hesitate to contact us. Thank you for reading, Pals!